Ring stand with bar crank approx. 2.5 x 21mm gold
商品情報 | 価格(税込) | 在庫 | 購入・お気に入り | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
¥308 | 〇 |
|
A ring stand with a flat, thin bar.
This is an original design from Kiwa Seisakusho. Please use adhesive to attach the parts. You can attach a continuous claw chain, design chain continuous claw pearl, resin pearl three quarter single hole, etc. to the bar. The size adjustment notch is on the bar side and can be adjusted by about ±2 to match the size of your fingers. Excel Epo is recommended as the adhesive.
*Please apply pressure slowly when adjusting the size. Also, please be careful not to repeatedly adjust the size or forcefully bend or stretch it as this may cause damage or peeling of the plating.
*As this is an accessory, the color may change to reflect changes in fashion. Also, during the processing process, color shading may occur without prior notice. Please note. (Some parts may differ in color from other parts.)
This is an original design from Kiwa Seisakusho. Please use adhesive to attach the parts. You can attach a continuous claw chain, design chain continuous claw pearl, resin pearl three quarter single hole, etc. to the bar. The size adjustment notch is on the bar side and can be adjusted by about ±2 to match the size of your fingers. Excel Epo is recommended as the adhesive.
*Please apply pressure slowly when adjusting the size. Also, please be careful not to repeatedly adjust the size or forcefully bend or stretch it as this may cause damage or peeling of the plating.
*As this is an accessory, the color may change to reflect changes in fashion. Also, during the processing process, color shading may occur without prior notice. Please note. (Some parts may differ in color from other parts.)
詳細情報
素材: 真鍮
対応パーツ
<おすすめのパーツ>※サイズ・入り数をご確認の上ご購入ください。
連爪チェーン(貴和クリスタル) #101(約2.4mm) 、#110(約3.0mm) 、#130(約4.0mm) 、#170(約6.14mm)
連爪チェーン(樹脂・ガラス) 3mm、4mm、6mm、QK-93(#101/約2.4mm)、QK-94(#110/約3mm) 、QK-102(#130/約4mm)
デザインチェーン 連爪パール 2.5mm、3mm
樹脂パール スリークオーター 片穴 6mm、8mm
石座 #1028/#1088用に留めた#1088 PP24(3mm) 、PP31(4mm) 、SS19(4.5mm) 、SS24(5.5mm) 、SS29(6mm)
* Products handled differ depending on the store. Please check with the store in advance before visiting.
* Replacement or return is not accepted due to customer's convenience (such as the wrong color and size, different from the image, etc.). For more informationUsage guidePlease see.
- ホーム / 
- Accessory gold tool / 
- ring stand / 
- pasting / 
- Ring stand with bar crank approx. 2.5 x 21mm gold
Access Denied
IMPORTANT! If you’re a store owner, please make sure you have Customer accounts enabled in your Store Admin, as you have customer based locks set up with EasyLockdown app. Enable Customer Accounts