Bar with ring stand bar × 28mm rhodium collar
| 商品情報 | 価格(税込) | 在庫 | 購入・お気に入り | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
¥297 | △ |
|
A ring with a flat, thin bar.
This is the original design of the Kiwa Corporation.Please paste a part on an adhesive, etc., and use it.You can paste the chain of nail-nail chains, design chain linkage pearls, resin-pearl-slie-sweater, tighter, and so on.The size adjustment break is on the side of the bar, and you can adjust the size of your finger to adjust to ± 2 degrees.Excelepo is recommended by the glue.
*Please use your power slowly when you are adjusting your size.Also, please be aware that the size control can be repeated multiple times, and that excessive bending can cause damage to the deck or the deck.
This is the original design of the Kiwa Corporation.Please paste a part on an adhesive, etc., and use it.You can paste the chain of nail-nail chains, design chain linkage pearls, resin-pearl-slie-sweater, tighter, and so on.The size adjustment break is on the side of the bar, and you can adjust the size of your finger to adjust to ± 2 degrees.Excelepo is recommended by the glue.
*Please use your power slowly when you are adjusting your size.Also, please be aware that the size control can be repeated multiple times, and that excessive bending can cause damage to the deck or the deck.
詳細情報
素材： 真鍮
対応パーツ
Chain chain #101 (approx. 2.4mm), #110 (approx. 3.0mm), #130 (approx. 4.0mm), #170 (approx. 6.14mm)
Design chain continuous pearl 2.5mm, 3mm
Resin pearl three quarter single hole 6mm, 8mm
Bezel #1088 fastened for #1028/#1088 PP24(3mm), PP31(4mm), SS19(4.5mm), SS24(5.5mm), SS29(6mm)
